![\"tc2000\"](\"https:\/\/i0.wp.com\/marbsignal.com\/v5\/wp-content\/uploads\/2015\/09\/tc2000.jpg\")
<\/a><\/p>\nFEATURES<\/h3>\n\n- Automatic \u2018look back\u2019 to Verify Correct Operation<\/li>\n
- Non-volatile Memory<\/li>\n
- Automatically Recovers from Programming Loop<\/li>\n
- 7 Days Minimum; 60 Days Typical Capacitive Backup<\/li>\n
- Display Assistance for Clock Programming<\/li>\n
- Automatic Daylight Savings Time Adjustment<\/li>\n
- Automatic Time: Updates Every 5 Minutes<\/li>\n<\/ul>\n
The TC-2000 2-way paging and programmable time clock will maintain the date & time and control the operations of the signal heads & flashers through programs stored in its\u2019 memory<\/p>\n
The system consists of three items:<\/p>\n
\n- TC-2000 time clock<\/li>\n
- DLPRO 2000 software (proprietary)<\/li>\n
- Access to an authorized paging service<\/li>\n<\/ul>\n
Contact ELTEC for paging provider availability in your area (800-227-1734)<\/p>\n
Programs are installed two ways. The options are:<\/p>\n
\n- Transmission to clock via paging service<\/li>\n
- Direct entry using key pad on clock<\/li>\n<\/ul>\n
Through the paging service, there are three programming options:<\/p>\n
\n- All units simultaneously<\/li>\n
- Selected group<\/li>\n
- Individual clock<\/li>\n<\/ul>\n
<\/p>\n
MORE INFORMATION & SPECIFICATIONS<\/h3>\n\n- \n2 Line x 16 Alpha Numeric Liquid Crystal Display (LCD)\u00a0for easy programming<\/div>\n<\/li>\n
- \nDisplay Assistance\u00a0for programming clock directly<\/div>\n<\/li>\n
- \nOperates with AC or DC (solar)<\/div>\n<\/li>\n
- \nSynchronous Timing on AC Power<\/div>\n<\/li>\n
- \nAutomatic \u2018Look Back\u2019 Every Minute:\u00a0verifies program step was executed<\/div>\n<\/li>\n
- \n2 Programmable Relay Outputs:\u00a0standard on all TC-2000\u2019s<\/div>\n<\/li>\n
- \nProgrammable Momentary Outputs:\u00a01-255 seconds<\/div>\n<\/li>\n
- \n3 \u2018Watch Dog\u2019 Circuits:\u00a0automatically recovers from any recoverable fault<\/div>\n<\/li>\n
- \nHigh Speed Reset Circuit:\u00a0prevent data corruption during unstable power conditions<\/div>\n<\/li>\n
- \nNon-Volatile Memory:\u00a0retains program data for the life of the clock<\/div>\n<\/li>\n
- \n7 Day Minimum; 60 Days Typical Capacitive Backup:\u00a0in the event of power failure<\/div>\n<\/li>\n
- \nAutomatically Recovers from Programming Loop<\/div>\n<\/li>\n
- \nAutomatically Adjusts to Daylight Savings Time:\u00a0programmable via keypad by user or from computer with DL Pro Software<\/div>\n<\/li>\n
- \nAutomatic Leap Year Compensation<\/div>\n<\/li>\n
- \n48 inch Cable with CPC Connector Included<\/div>\n<\/li>\n<\/ul>\n
<\/p>\n
TC-2000 SPECIFICATIONS<\/h3>\n\n- Dimensions……………………………………………….9.2″ H x 4\u00bc” W x 3″ D<\/li>\n
- Display……………………………………………….Alpha\/Numeric Backlit LCD<\/li>\n
- Keypad…………………………………………………………..Telephone Style<\/li>\n
- Outputs…………………………………………2 SPDT Rated at 16A\/120 VAC<\/li>\n
- Back-up Power………………….Capacitive: 7 day Minimum, 60 Day Typical<\/li>\n
- Time Base…………………………………………………….+\/-.0025% Crystal<\/li>\n
- Crystal Temp Coefficient………………………….-.04 ppm\/deg C2 Maximum<\/li>\n
- Line Voltage…………………………………………12VDC\/95-135 VAC, 60 Hz<\/li>\n
- Power Required………………………………………………………..2.5 Watts<\/li>\n
- Temperature Range…………………………………-30 deg. C to +74 deg. C<\/li>\n
- Electrical Connection……………………………………….CPC with 48″ Cable<\/li>\n<\/ul>\n
Note: An additional 2 inches of space in the cabinet beyond the length of the unit must be allowed for the CPC connector.<\/p>\n
The 2-Way Pager\/Programmable Time Clock may be 120 VAC or 12 VDC powered.<\/p>\n
<\/p>\n
DLPRO SOFTWARE FOR TC-2000 2-WAY PAGING TIME CLOCK<\/h1>\n
The DLPRO software will run on Windows 2000, XP or Vista operating systems. The software allows the user to print a hardcopy listing all programs and schedules of remote sites. It maintains a history of the last 500 messages\/pages sent.<\/p>\n
The clock stores only one email address to which the unit responds in the following ways:<\/p>\n
\n- An annual program with exceptions<\/li>\n
- An alternate program<\/li>\n
- An immediate program<\/li>\n
- To turn ON or OFF relays manually<\/li>\n
- Time updates<\/li>\n
- To query the units regarding status (date, time, unit ID, program running, and relay state)<\/li>\n
- An email address change<\/li>\n<\/ul>\n
DLPRO Software FEATURES<\/h3>\n\n- 99 Different Groups<\/li>\n
- 99 Locations\/units Per Group<\/li>\n
- 99 Annual Programs: 1 per group; up to 20 steps each and 20 exceptions<\/li>\n
- Alternate Program Steps: up to 15 steps<\/li>\n
- Immediate Program: up to 15 steps<\/li>\n
- Manual Control of an individual remote clock<\/li>\n
- Individual Clock Query for status<\/li>\n
- Data Base of last 500 pages transmitted<\/li>\n<\/ul>\n
Group Programming and Assignment:\u00a0The software is capable is identifying 1-99 groups with each group containing multiple clocks. The unique group number assures that only the time clocks in a specific group will be paged. A menu box allows the user to view established group and\/or units within the group. The user can also view the individual\/unique annual program associated with each group. The annual program is considered the default plan for that group.<\/p>\n
Annual Program:\u00a0The system is capable of allowing for an annual program for each group defined. An annual program is defined by the school calendar which includes holidays, no school days and early dismissals. A group must have an annual program associated with it, and the annual program is the default program. The annual program includes start date, end date, group number and program number. The annual program will run indefinitely but is usually defined for a 12-month period. The annual program for each group may be copied from the annual master program to aid the user in program entry.<\/p>\n
Location and Individual Unit Programming:\u00a0Each group (see above) has the capability of accommodating up to 99 different programmable time clock location addresses. The programming of each site includes the location name, location type, group number and a unique ID number.<\/p>\n
Alternate Program:\u00a0An alternate program may include up to 15 steps. An alternate program includes the date that the program is to start and the date that it will end. An alternate program will operate from the scheduled start date and time through 12 AM\/midnight of the end date.<\/p>\n
Immediate Program:\u00a0An immediate program may include up to 15 steps. An immediate program runs only on the date that the program is transmitted to the remote location. An immediate program will operate from the time that it is received until 11:59:59 PM of the same date.<\/p>\n
Manual Control:\u00a0The program allows the operator to take manual control of any group or unit of flashers through the DLPRO Software.<\/p>\n
Email Confirmation:\u00a0After a group or unit is paged, each unit will respond via email with an acknowledgement of what page (e.g. annual program, email address change, diagnostic, etc.) has been received. The operator identifies the units responding and compares the responding list against the transmission list. If a unit fails to respond, the operator then retransmits the message to that specific unit and the process is repeated.<\/p>\n","protected":false},"excerpt":{"rendered":"
ELTEC\u2019s TC-2000 2-way paging and programmable time clock allows managing all your flashing beacons from one location, eliminating the need to send technicians\/service personnel to sites to change or modify programs. The scheduling program for the entire school year including all exceptions is sent with one transmission. Because of this, our system unlike competitor\u2019s systems, does not require a computer to be online and\/or dedicated to the paging system. AfterRead More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"fullwidth.php","meta":{"bgseo_title":"","bgseo_description":"","bgseo_robots_index":"","bgseo_robots_follow":"","footnotes":""},"class_list":["post-133","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P6LyTK-29","_links":{"self":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/comments?post=133"}],"version-history":[{"count":3,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133\/revisions"}],"predecessor-version":[{"id":320,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133\/revisions\/320"}],"wp:attachment":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/media?parent=133"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The TC-2000 2-way paging and programmable time clock will maintain the date & time and control the operations of the signal heads & flashers through programs stored in its\u2019 memory<\/p>\n
The system consists of three items:<\/p>\n
- \n
- TC-2000 time clock<\/li>\n
- DLPRO 2000 software (proprietary)<\/li>\n
- Access to an authorized paging service<\/li>\n<\/ul>\n
Contact ELTEC for paging provider availability in your area (800-227-1734)<\/p>\n
Programs are installed two ways. The options are:<\/p>\n
- \n
- Transmission to clock via paging service<\/li>\n
- Direct entry using key pad on clock<\/li>\n<\/ul>\n
Through the paging service, there are three programming options:<\/p>\n
- \n
- All units simultaneously<\/li>\n
- Selected group<\/li>\n
- Individual clock<\/li>\n<\/ul>\n
<\/p>\n
MORE INFORMATION & SPECIFICATIONS<\/h3>\n
- \n
- \n2 Line x 16 Alpha Numeric Liquid Crystal Display (LCD)\u00a0for easy programming<\/div>\n<\/li>\n
- \n
Display Assistance\u00a0for programming clock directly<\/div>\n<\/li>\n- \n
Operates with AC or DC (solar)<\/div>\n<\/li>\n- \n
Synchronous Timing on AC Power<\/div>\n<\/li>\n- \n
Automatic \u2018Look Back\u2019 Every Minute:\u00a0verifies program step was executed<\/div>\n<\/li>\n- \n
2 Programmable Relay Outputs:\u00a0standard on all TC-2000\u2019s<\/div>\n<\/li>\n- \n
Programmable Momentary Outputs:\u00a01-255 seconds<\/div>\n<\/li>\n- \n
3 \u2018Watch Dog\u2019 Circuits:\u00a0automatically recovers from any recoverable fault<\/div>\n<\/li>\n- \n
High Speed Reset Circuit:\u00a0prevent data corruption during unstable power conditions<\/div>\n<\/li>\n- \n
Non-Volatile Memory:\u00a0retains program data for the life of the clock<\/div>\n<\/li>\n- \n
7 Day Minimum; 60 Days Typical Capacitive Backup:\u00a0in the event of power failure<\/div>\n<\/li>\n- \n
Automatically Recovers from Programming Loop<\/div>\n<\/li>\n- \n
Automatically Adjusts to Daylight Savings Time:\u00a0programmable via keypad by user or from computer with DL Pro Software<\/div>\n<\/li>\n- \n
Automatic Leap Year Compensation<\/div>\n<\/li>\n- \n
48 inch Cable with CPC Connector Included<\/div>\n<\/li>\n<\/ul>\n<\/p>\n
TC-2000 SPECIFICATIONS<\/h3>\n
- \n
- Dimensions……………………………………………….9.2″ H x 4\u00bc” W x 3″ D<\/li>\n
- Display……………………………………………….Alpha\/Numeric Backlit LCD<\/li>\n
- Keypad…………………………………………………………..Telephone Style<\/li>\n
- Outputs…………………………………………2 SPDT Rated at 16A\/120 VAC<\/li>\n
- Back-up Power………………….Capacitive: 7 day Minimum, 60 Day Typical<\/li>\n
- Time Base…………………………………………………….+\/-.0025% Crystal<\/li>\n
- Crystal Temp Coefficient………………………….-.04 ppm\/deg C2 Maximum<\/li>\n
- Line Voltage…………………………………………12VDC\/95-135 VAC, 60 Hz<\/li>\n
- Power Required………………………………………………………..2.5 Watts<\/li>\n
- Temperature Range…………………………………-30 deg. C to +74 deg. C<\/li>\n
- Electrical Connection……………………………………….CPC with 48″ Cable<\/li>\n<\/ul>\n
Note: An additional 2 inches of space in the cabinet beyond the length of the unit must be allowed for the CPC connector.<\/p>\n
The 2-Way Pager\/Programmable Time Clock may be 120 VAC or 12 VDC powered.<\/p>\n
<\/p>\n
DLPRO SOFTWARE FOR TC-2000 2-WAY PAGING TIME CLOCK<\/h1>\n
The DLPRO software will run on Windows 2000, XP or Vista operating systems. The software allows the user to print a hardcopy listing all programs and schedules of remote sites. It maintains a history of the last 500 messages\/pages sent.<\/p>\n
The clock stores only one email address to which the unit responds in the following ways:<\/p>\n
- \n
- An annual program with exceptions<\/li>\n
- An alternate program<\/li>\n
- An immediate program<\/li>\n
- To turn ON or OFF relays manually<\/li>\n
- Time updates<\/li>\n
- To query the units regarding status (date, time, unit ID, program running, and relay state)<\/li>\n
- An email address change<\/li>\n<\/ul>\n
DLPRO Software FEATURES<\/h3>\n
- \n
- 99 Different Groups<\/li>\n
- 99 Locations\/units Per Group<\/li>\n
- 99 Annual Programs: 1 per group; up to 20 steps each and 20 exceptions<\/li>\n
- Alternate Program Steps: up to 15 steps<\/li>\n
- Immediate Program: up to 15 steps<\/li>\n
- Manual Control of an individual remote clock<\/li>\n
- Individual Clock Query for status<\/li>\n
- Data Base of last 500 pages transmitted<\/li>\n<\/ul>\n
Group Programming and Assignment:\u00a0The software is capable is identifying 1-99 groups with each group containing multiple clocks. The unique group number assures that only the time clocks in a specific group will be paged. A menu box allows the user to view established group and\/or units within the group. The user can also view the individual\/unique annual program associated with each group. The annual program is considered the default plan for that group.<\/p>\n
Annual Program:\u00a0The system is capable of allowing for an annual program for each group defined. An annual program is defined by the school calendar which includes holidays, no school days and early dismissals. A group must have an annual program associated with it, and the annual program is the default program. The annual program includes start date, end date, group number and program number. The annual program will run indefinitely but is usually defined for a 12-month period. The annual program for each group may be copied from the annual master program to aid the user in program entry.<\/p>\n
Location and Individual Unit Programming:\u00a0Each group (see above) has the capability of accommodating up to 99 different programmable time clock location addresses. The programming of each site includes the location name, location type, group number and a unique ID number.<\/p>\n
Alternate Program:\u00a0An alternate program may include up to 15 steps. An alternate program includes the date that the program is to start and the date that it will end. An alternate program will operate from the scheduled start date and time through 12 AM\/midnight of the end date.<\/p>\n
Immediate Program:\u00a0An immediate program may include up to 15 steps. An immediate program runs only on the date that the program is transmitted to the remote location. An immediate program will operate from the time that it is received until 11:59:59 PM of the same date.<\/p>\n
Manual Control:\u00a0The program allows the operator to take manual control of any group or unit of flashers through the DLPRO Software.<\/p>\n
Email Confirmation:\u00a0After a group or unit is paged, each unit will respond via email with an acknowledgement of what page (e.g. annual program, email address change, diagnostic, etc.) has been received. The operator identifies the units responding and compares the responding list against the transmission list. If a unit fails to respond, the operator then retransmits the message to that specific unit and the process is repeated.<\/p>\n","protected":false},"excerpt":{"rendered":"
ELTEC\u2019s TC-2000 2-way paging and programmable time clock allows managing all your flashing beacons from one location, eliminating the need to send technicians\/service personnel to sites to change or modify programs. The scheduling program for the entire school year including all exceptions is sent with one transmission. Because of this, our system unlike competitor\u2019s systems, does not require a computer to be online and\/or dedicated to the paging system. AfterRead More<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"fullwidth.php","meta":{"bgseo_title":"","bgseo_description":"","bgseo_robots_index":"","bgseo_robots_follow":"","footnotes":""},"class_list":["post-133","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P6LyTK-29","_links":{"self":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/comments?post=133"}],"version-history":[{"count":3,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133\/revisions"}],"predecessor-version":[{"id":320,"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/pages\/133\/revisions\/320"}],"wp:attachment":[{"href":"https:\/\/marbsignal.com\/v5\/wp-json\/wp\/v2\/media?parent=133"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- \n
- \n